Common Errorcodes

ANR8302E

KEY = 06

“KEY = 06” means “Unit Attention”

in relation with

ASC/ASQ Meaning Source
ASC=2A, ASCQ=03 SCSI reservation error because several TSM instances use the same persisten name https://www-01.ibm.com/support/docview.wss?uid=swg1IT03879
ASC=29 , ASCQ=00 “Power-on, reset, bus reset” https://www-01.ibm.com/support/docview.wss?uid=swg1IT20573

KEY = FF

ANR8460E

ANR8460E AUDIT LIBRARY process for library <Library Name> failed.
in combination with possible reason solution
ANR9024E There are no drives available. at least one drive is not available check drives and make all available
check if drives are rotten and if so, remove their definition and paths completely

ANR8840E

error number 2

PVRRC Meaning Source Solution
2843 unable to access gripper device restart Lintape daemon or Wintape service

error number 11

PVRRC Meaning Source Solution
2845 Unable to open device <DEVICE> audit library failed after drives / paths got unavailable scsi information mismatch:
* reboot server
* reboot library
* force rescan scsi bus on device layer
* check if the lintape driver is running ;-)

ANR8779E

 ANR 8779E Unable to open drive <NAME>, error number= 2

in combination with

ANR1401W

ANR1401W Mount request denied for volume <NAME> - mount failed.

Possible Reasons:

  • SCSI connection lost on Library Client:
    • Solution: rescan the SCSI bus:
      ⇒ run as root: rescan-scsi-bus.sh
  • Persitent Naming fails due to an temporary SCSI-Error
    • Solution: let the udev daemon reload the rules:
      ⇒ run as root: udevadm trigger