Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
en:services:network_services:eduroam:windows_8 [2019/03/14 09:51]
tkoerme [eduroam with Windows]
en:services:network_services:eduroam:windows_8 [2019/04/15 20:20] (current)
0spohl
Line 2: Line 2:
 Eduroam can be installed either with the Configuration Wizard (CAT) or manually. To install with the CAT, you must have an Internet connection to download the wizard. For example, the wizard can be downloaded from the GuestOnCampus network without logging in. Eduroam can be installed either with the Configuration Wizard (CAT) or manually. To install with the CAT, you must have an Internet connection to download the wizard. For example, the wizard can be downloaded from the GuestOnCampus network without logging in.
  
-**Installation ​using the CAT tool is strongly recommended!** +**To ensure a secure eduroam configuration,​ it is strongly recommended to set up eduroam ​using the configuration wizard (CAT tool)!** 
-===== Setting up the eduroam ​WLAN with the CAT tool =====+===== Setting up the eduroam with the CAT tool =====
  
 After downloading the eduroam configuration assistant from [[https://​cat.eduroam.org/​|here]] just run the //.exe// file. After downloading the eduroam configuration assistant from [[https://​cat.eduroam.org/​|here]] just run the //.exe// file.
-This will launch the assistant. ​ Follow the assistant until you are asked for your credentials.+This will launch the assistant.  ​ 
 + 
 +{{ :​en:​services:​network_services:​eduroam:​eduroam_catw101_en.png |}} 
 + 
 +Follow the assistant until you are asked for your credentials.
 Enter your credentials according to the table in the [[en:​services:​network_services:​eduroam:#​username|username]] section. Enter your credentials according to the table in the [[en:​services:​network_services:​eduroam:#​username|username]] section.
-{{ :​en:​services:​network_services:​eduroam:​cat-login-en.png |}}+ 
 +{{ :​en:​services:​network_services:​eduroam:​eduroam_catw103_en.png |}} 
  After finishing the assistant your computer will automatically connect to the eduroam network if it is available.  After finishing the assistant your computer will automatically connect to the eduroam network if it is available.
-{{ :​en:​services:​network_services:​eduroam:​cat-w8-done.png |}} 
    
 ===== Manual eduroam configuration ===== ===== Manual eduroam configuration =====
Line 18: Line 23:
 To manually set-up the connection for eduroam the following steps are necessary. To manually set-up the connection for eduroam the following steps are necessary.
  
-1. Move the cursor to the right side of the Desktop and choose "​search"​. +1. Click right on the network symbol ​in your status bar and choose ​**Open ​Network ​& Internet ​settings**.
- +
-{{ :​en:​services:​network_services:​eduroam:​win8_search.png?​direct&​50 |Search Panel}} +
- +
- +
-2. At next type in "​Control Panel" and click at the icon below. +
- +
-{{ :​en:​services:​network_services:​eduroam:​win8_search_control_panel.png?​direct |Control Panel}} +
- +
- +
-3. Actuallay the Control Panel is open. Then select "All Control Panel Items" in the Taskbar ​and choose ​"Network ​and Sharing Center ". +
- +
-{{ :​en:​services:​network_services:​eduroam:​win8_all_control_panel_items.png?​direct |Control Panel Items}} +
- +
- +
-4. Now you Choose "Set up a new connection or network"​. +
- +
-{{ :​en:​services:​network_services:​eduroam:​win8_network_and_sharing_center.png?​direct |Network and Sharing Center}} +
- +
-{{ :​en:​services:​network_services:​eduroam:​win8_setup_a_connection.png?​direct |Set Up a Connection}} +
- +
- +
-5. In network name put “eduroam”,​ as security type “WPA2-Enterprise”,​ encryption type “AES”, click on “next”.  +
- +
-{{ :​en:​services:​network_services:​eduroam:​win8_manually_connect.png?​direct |Manually Connect}} +
- +
- +
-6. Click on "​Change connection ​settings". +
- +
-{{ :​en:​services:​network_services:​eduroam:​win8_m_c_network.png?​direct |Manually Connect to the Network}} +
- +
- +
-7. Now you just change the Network properties.  +
- +
-{{ :​en:​services:​network_services:​eduroam:​win8_eduroam_prop.png?​direct |eduroam Properties}} +
- +
- +
-8. select “Microsoft:​ Protected EAP (PEAP)” as the method, click on “settings”.  +
- +
-{{ :​en:​services:​network_services:​eduroam:​win8_big_mac_network.png?​direct |Bic Mac Connection}} +
- +
- +
-9. check “validate server certificate” and in the list of root certificates select “T-TeleSec Global Root Class 2” (see the note below).Pick “Secure Password (EAP-MSCHAP v2)” as authentication method. +
- +
-**// +
-It is strongly recommended to select an eduroam server in the configuration which connect to your computerThis ensures that your PC, mobile phone etc. only connect to the eduroam SSID at institutions and facilities which are allowed to broadcast eduroam WiFi. The check box “Connect to that server” must be enabled and the connection just below to the server eduroam.gwdg.de .Optional you can protect your identity in the eduroam Network, by setting the checkbox “enable identity protection” and typing the word eduroam in the right text box.//**+
  
-{{ :​en:​services:​network_services:​eduroam:​eduroampeap.png?direct |Protected EAP}}+{{ :​en:​services:​network_services:​eduroam:​eduroam_win10_1.png?direct |}}
  
  
-10click on configure ​and uncheck “automatically use Windows…”,​ click “OK”+2Click **Network ​and Sharing Center**.
  
-{{ :​en:​services:​network_services:​eduroam:​win8_eap_mchap2.png?direct ​|EAP MCHAP2 Properties}}+{{ :​en:​services:​network_services:​eduroam:​eduroam_win10_2_en.png?800 |}}
  
  
-11At Menue-card 802.1X settings, check Specify authentication mode and choose ​“User ​or computer authentication” and click on "​Ok"​.+3Now you choose ​**Set up a new connection ​or network**.
  
-{{ :​en:​services:​network_services:​eduroam:​win8_advanced_settings.png?direct ​|Advanced Settings}}+{{ :​en:​services:​network_services:​eduroam:​eduroam_win10_3_en.png?800 |}}
  
  
-12Scroll with the Curser on the right side of the Desktop ​and choose "​Networks"​.Click on the "​eduroam"​ SSID...+4Choose **Manually connect to a wireless network** ​and click next.
  
-{{ :​en:​services:​network_services:​eduroam:​win8_networks.png?direct |Networks}}+{{ :​en:​services:​network_services:​eduroam:​eduroam_win10_4_en.png?direct |}}
  
  
-13Try to connect the "eduroam" Networkpress the "​Connect"​ Button...+5In network name put **eduroam**as security type **WPA2-Enterprise**,​ encryption type **AES**, click on next
  
-{{ :​en:​services:​network_services:​eduroam:​win8_choose_eduroam.png?direct&​200 ​|Chosse eduroam}}+{{ :​en:​services:​network_services:​eduroam:​eduroam_win10_5_en.png?direct |}}
  
  
-14. Click on "​Connect"​ ...+6. Click on **Change connection settings**.
  
-{{ :​en:​services:​network_services:​eduroam:​win8_continue_warning.png?direct |Continue Warning}}+{{ :​en:​services:​network_services:​eduroam:​eduroam_win10_6_en.png?direct |}}
  
  
-15At last sign in with your [[en:​services:​network_services:​eduroam:#​username|username]] and password.+7Now you just change the Network properties. Select **MicrosoftProtected EAP (PEAP)** as the method, click on **settings**.
  
-{{ :​en:​services:​network_services:​eduroam:​win8_user_login.png?direct&​200 ​|User Login}}+{{ :​en:​services:​network_services:​eduroam:​eduroam_win10_7_en.png?direct |}}
  
-Now you can connect to eduroam. If this does not happen automatically after set-up just click the SSID in the list of available wireless networks to connect. For details on how to log-in see information [[#username |above]]. 
  
-Account administration (changing passwords etc.): [[https://​portal.gwdg.de/​|Customer Portal]].+8Check the boxes for **Verify the server'​s identity by validating the certificate** and  
 +on **Connect to these servers** and uncheck **Enable Fast Reconnect**. 
 +Activate the option **Enable Identity privacy** and enter **eduroam** in the following text field.
  
 +Choose the certificate **T-TeleSec Global Root Class2** at the list of **Trusted Root Certification Authorities**.
  
 +Select **Secured password (EAP-MSCHAP v2)** as Authentication Method and click on **Configure**.
  
-=== Note in term of an incorrect connection===+{{ :en:​services:​network_services:​eduroam:​eduroam_win10_8_en.png?​direct |}}
  
-In the past it happened quite often, that Wi-Fi was not always available. The reason for this was mostly the internal Windows driver for the wireless adapter. To eliminate this error, please use the current WLAN driver from your laptop manufacturer'​s website and install it. In the case that no Windows 8 or 8.1 drivers are available, please use the latest Windows 7 drivers. 
  
 +9. Uncheck **automatically use Windows…** and click **OK**. ​
  
-Sometimes Windows 8 use a default profile for the connection with the "eduroam" WiFi- Network and you cant't change the Settings anymore. In this case you must delete these default profile+{{ :​en:​services:​network_services:​eduroam:​eduroam_win10_9_en.png?direct |}}
  
-To delete the default profile, use the shortcut "​Windows + Q" and open the "​Command Prompt"​. Then type the command: //**netsh wlan delete profile name = "​eduroam"​**//​ and press "​Enter"​. If you have a different name for your network, ​ replace the word "​eduroam"​ with you current networkname. ​ 
  
-{{ :​en:​services:​network_services:​eduroam:​win8_terminal.png?direct |Delete Networkprofile manually}}+10. Click on **Advanced settings**. Check **Specify authentication mode** and choose **User authentication**.
  
-==== Note ====+{{ :​en:​services:​network_services:​eduroam:​eduroam_win10_10_en.png?​direct |}}
  
-A secure, encrypted connection can also be established without validating the server certificate. The certificate ensures the client that the connection is made to a legitimate access point of the intendet wireless network. Therefore validation is recommended.+{{ :​en:​services:​network_services:​eduroam:​eduroam_win10_11_en.png?direct |}}
  
-If the certificate is not available from the list it can be downloaded from [[http://​ca.gwdg.de]] with a right-click on the installation link, selecting download and installing it with a double click. The certificate is also available through the update of the "root certificates" ​ [[http://​windowsupdate.microsoft.com]] or from the "​optional updates"​ of the Windows Update application (see also KB931125). 
  
-If authentication fails despite correct ​username and password ​the cause may be a certificate problem. For testing the validation can be disabled.+11. At last click on "Save credentials"​ and type in your [[en:​services:​network_services:​eduroam:#​username|username]] ​and password.
  
 +{{ :​en:​services:​network_services:​eduroam:​eduroam_win10_12_en.png?​direct&​ |}}
  
 +Now you can connect to eduroam. If this does not happen automatically after set-up just click the SSID in the list of available wireless networks to connect. ​