Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
en:services:storage_services:backup:tsm:admin:fc_stuff [2019/04/03 14:22]
bnachtw created
en:services:storage_services:backup:tsm:admin:fc_stuff [2020/01/07 16:14]
bnachtw [using systool]
Line 14: Line 14:
 /​sys/​class/​scsi_host/​host18/​device/​fc_host/​host18/​port_name 0x2100f4e9d45573c9 /​sys/​class/​scsi_host/​host18/​device/​fc_host/​host18/​port_name 0x2100f4e9d45573c9
 </​code>​ </​code>​
 +=== using systool ===
 +according to [[https://​www.thegeekdiary.com/​how-to-identify-the-hba-cardsports-and-wwn-in-rheloel/​| The Geek Diary]]
 +  * To check the available HBA ports :
 +<​code>​
 +# systool -c fc_host
 +Class = "​fc_host"​
 +
 +  Class Device = "​host2"​
 +    Device = "​host2"​
 +
 +  Class Device = "​host3"​
 +    Device = "​host3"​
 +</​code>​
 +
 +  * To find the WWNs for the HBA ports :
 +<​code>​
 +# systool -c fc_host -v | grep port_name
 +    port_name ​          = "​0x500143802426baf4"​
 +    port_name ​          = "​0x500143802426baf6"​
 +</​code>​
 +  * To check the state of the HBA ports (online/​offline) :
 +<​code>​
 +# systool -c fc_host -v | grep port_state
 +    port_state ​         = "​Online"​
 +    port_state ​         = "​Online"​
 +</​code>​
 +===== multipathing =====
 +==== paths & devices ====
 +==== multipathd commands ====
 +multipathd is not only the the multipath daemon itself, but also a useful command for analysing the SAN:
 +<​code>​
 +# multipathd --help
 +</​code>​
 +FIXME
 +