Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
en:services:network_services:eduroam:windows_s [2019/05/21 16:14]
totto created
en:services:network_services:eduroam:windows_s [2019/05/21 16:54] (current)
tkoerme
Line 1: Line 1:
 ====== eduroam with Windows S ====== ====== eduroam with Windows S ======
  
 +Unfortunately,​ no CAT tool is offered for Windows S, since the CAT tool can only be installed from the Microsoft App Store software and is not made available there for technical reasons. Therefore, a manual eduroam setup must be carried out for this operating system. ​
  
 +To set up eduroam manually, you may need to install the T-TeleSec root certificate. You can download the root certificate from the following link and install it on your device: [[https://​www.pki.dfn.de/​fileadmin/​PKI/​zertifikate/​T-TeleSec_GlobalRoot_Class_2.crt]]]
 +
 +The following steps are required for manual eduroam configuration: ​
 +
 +1. Click right on the network symbol in your status bar and choose **Open Network & Internet settings**.
 +
 +{{ :​en:​services:​network_services:​eduroam:​eduroam_win10_1.png?​direct |}}
 +
 +
 +2. Click **Network and Sharing Center**.
 +
 +{{ :​en:​services:​network_services:​eduroam:​eduroam_win10_2_en.png?​800 |}}
 +
 +
 +3. Now you choose **Set up a new connection or network**.
 +
 +{{ :​en:​services:​network_services:​eduroam:​eduroam_win10_3_en.png?​800 |}}
 +
 +
 +4. Choose **Manually connect to a wireless network** and click next.
 +
 +{{ :​en:​services:​network_services:​eduroam:​eduroam_win10_4_en.png?​direct |}}
 +
 +
 +5. In network name put **eduroam**,​ as security type **WPA2-Enterprise**,​ encryption type **AES**, click on next. 
 +
 +{{ :​en:​services:​network_services:​eduroam:​eduroam_win10_5_en.png?​direct |}}
 +
 +
 +6. Click on **Change connection settings**.
 +
 +{{ :​en:​services:​network_services:​eduroam:​eduroam_win10_6_en.png?​direct |}}
 +
 +
 +7. Now you just change the Network properties. Select **Microsoft:​ Protected EAP (PEAP)** as the method, click on **settings**.
 +
 +{{ :​en:​services:​network_services:​eduroam:​eduroam_win10_7_en.png?​direct |}}
 +
 +
 +8. Check the boxes for **Verify the server'​s identity by validating the certificate** and 
 +on **Connect to these servers** and uncheck **Enable Fast Reconnect**.
 +Activate the option **Enable Identity privacy** and enter **eduroam** in the following text field.
 +
 +Choose the certificate **T-TeleSec Global Root Class2** at the list of **Trusted Root Certification Authorities**.
 +
 +Select **Secured password (EAP-MSCHAP v2)** as Authentication Method and click on **Configure**.
 +
 +{{ :​en:​services:​network_services:​eduroam:​eduroam_win10_8_en.png?​direct |}}
 +
 +
 +9. Uncheck **automatically use Windows…** and click **OK**. ​
 +
 +{{ :​en:​services:​network_services:​eduroam:​eduroam_win10_9_en.png?​direct |}}
 +
 +
 +10. Click on **Advanced settings**. Check **Specify authentication mode** and choose **User authentication**.
 +
 +{{ :​en:​services:​network_services:​eduroam:​eduroam_win10_10_en.png?​direct |}}
 +
 +{{ :​en:​services:​network_services:​eduroam:​eduroam_win10_11_en.png?​direct |}}
 +
 +
 +11. At last click on "Save credentials"​ and type in your [[en:​services:​network_services:​eduroam:#​username|username]] and password.
 +
 +{{ :​en:​services:​network_services:​eduroam:​eduroam_win10_12_en.png?​direct&​ |}}
 +
 +Now you can connect to eduroam. If this does not happen automatically after set-up just click the SSID in the list of available wireless networks to connect. ​