Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
en:services:network_services:eduroam:windows_8 [2019/07/10 15:51] – [What should I do if the eduroam setup is not successful with the CAT tool?] tkoermeen:services:network_services:eduroam:windows_8 [2019/07/10 16:01] (current) – [What should I do if the eduroam setup is not successful with the CAT tool?] tkoerme
Line 1: Line 1:
 +====== eduroam with Windows (Vista+)======
 +
 +Eduroam can be installed using either [[#Setting up the eduroam with the CAT tool |configuration wizard (CAT tool)]] or [[#Manual eduroam configuration|manual]]. To install with the CAT tool, you must have an Internet connection (LAN, WLAN, cellular) to download the wizard. 
 +
 +**It is strongly recommended to install eduroam using the configuration wizard (CAT tool), which is available for participating institutes at https://cat.eduroam.org **.
 +
 +===== Setting up the eduroam with the CAT tool =====
 +
 +After downloading the eduroam configuration assistant from [[https://cat.eduroam.org/|here]] just run the //.exe// file.
 +This will launch the assistant.  
 +
 +{{ :en:services:network_services:eduroam:eduroam_catw101_en.png |}}
 +
 +Follow the assistant until you are asked for your credentials.
 +Enter your credentials according to the table in the [[en:services:network_services:eduroam:#username|username]] section.
 +
 +{{ :en:services:network_services:eduroam:eduroam_catw103_en.png |}}
 +
 + After finishing the assistant your computer will automatically connect to the eduroam network if it is available.
 + 
 +===== Manual eduroam configuration =====
 +To set up eduroam manually, you may need to install the T-TeleSec root certificate. You can download the root certificate from the following link and install it on your device: [[https://www.pki.dfn.de/fileadmin/PKI/zertifikate/T-TeleSec_GlobalRoot_Class_2.crt]]]
 +
 +The following steps are required for manual eduroam configuration: 
 +
 +1. Click right on the network symbol in your status bar and choose **Open Network & Internet settings**.
 +
 +{{ :en:services:network_services:eduroam:eduroam_win10_1.png?direct |}}
 +
 +
 +2. Click **Network and Sharing Center**.
 +
 +{{ :en:services:network_services:eduroam:eduroam_win10_2_en.png?800 |}}
 +
 +
 +3. Now you choose **Set up a new connection or network**.
 +
 +{{ :en:services:network_services:eduroam:eduroam_win10_3_en.png?800 |}}
 +
 +
 +4. Choose **Manually connect to a wireless network** and click next.
 +
 +{{ :en:services:network_services:eduroam:eduroam_win10_4_en.png?direct |}}
 +
 +
 +5. In network name put **eduroam**, as security type **WPA2-Enterprise**, encryption type **AES**, click on next. 
 +
 +{{ :en:services:network_services:eduroam:eduroam_win10_5_en.png?direct |}}
 +
 +
 +6. Click on **Change connection settings**.
 +
 +{{ :en:services:network_services:eduroam:eduroam_win10_6_en.png?direct |}}
 +
 +
 +7. Now you just change the Network properties. Select **Microsoft: Protected EAP (PEAP)** as the method, click on **settings**.
 +
 +{{ :en:services:network_services:eduroam:eduroam_win10_7_en.png?direct |}}
 +
 +
 +8. Check the boxes for **Verify the server's identity by validating the certificate** and 
 +on **Connect to these servers** and uncheck **Enable Fast Reconnect**.
 +Activate the option **Enable Identity privacy** and enter **eduroam** in the following text field.
 +
 +Choose the certificate **T-TeleSec Global Root Class2** at the list of **Trusted Root Certification Authorities**.
 +
 +Select **Secured password (EAP-MSCHAP v2)** as Authentication Method and click on **Configure**.
 +
 +{{ :en:services:network_services:eduroam:eduroam_win10_8_en.png?direct |}}
 +
 +
 +9. Uncheck **automatically use Windows…** and click **OK**. 
 +
 +{{ :en:services:network_services:eduroam:eduroam_win10_9_en.png?direct |}}
 +
 +
 +10. Click on **Advanced settings**. Check **Specify authentication mode** and choose **User authentication**.
 +
 +{{ :en:services:network_services:eduroam:eduroam_win10_10_en.png?direct |}}
 +
 +{{ :en:services:network_services:eduroam:eduroam_win10_11_en.png?direct |}}
 +
 +
 +11. At last click on "Save credentials" and type in your [[en:services:network_services:eduroam:#username|username]] and password.
 +
 +{{ :en:services:network_services:eduroam:eduroam_win10_12_en.png?direct& |}}
 +
 +Now you can connect to eduroam. If this does not happen automatically after set-up just click the SSID in the list of available wireless networks to connect. 
 +
 +=====What should I do if the eduroam setup is not successful with the CAT tool?=====
 +
 +Please first delete the existing eduroam profile on your system. Then use the CAT tool to set up eduroam again.
 +
 +**Instructions for deleting the eduroam profile under Windows**
 +
 +1. Please open the "Command Prompt" window. \\
 +For example, you can open the "Command Prompt" window by typing the command //cmd// into the search field // Enter text here to search// in the menu bar at the bottom of the screen and then pressing the Enter key.
 +
 +2. In the "Command Prompt" window, enter the following command. (If the eduroam profile has not been successfully deleted, please use **name=Eduroam**!)\\
 +
 +**//netsh wlan delete profile name=eduroam//**
 +
 +{{ :en:services:network_services:eduroam:eduroam_win10_13_blank.png?direct |}}
 +
 +Result: 
 +The eduroam profile is now deleted from your system.
 +
 +
 +
 +